About

Gitless is a Git-compatible version control system, that is easy to learn and use:

Documentation

Interface

Guide

creating a repository | saving changes | branching | tagging | working with remote repositories

Creating a Repository

Say you are in directory foo and you want turn it into a repository. You do this with the gl init command. This transforms the current working directory into an empty repository and you are now ready to start saving changes to files in foo: 

$ mkdir foo
$ cd foo/
$ gl init
✔ Local repo created in /MyFiles/foo

In most cases, instead of starting with an empty repository, there's already some existing remote repository you want to work on. To clone a remote repository, you pass the URL of the repository to the same gl init command, as shown below (note that you'll have to replace https://github.com/gitless-vcs/try-gitless with the URL of your repo): 

$ mkdir try-gitless
$ cd try-gitless/
$ gl init https://github.com/gitless-vcs/try-gitless
✔ Local repo created in /MyFiles/try-gitless
✔ Initialized from remote https://github.com/gitless-vcs/try-gitless

If you don't have a remote repository yet, you can follow these instructions to create one on GitHub.

Saving Changes

Now that you have your local repository, it's time to start saving changes to files. A file in Gitless can be tracked, untracked or ignored. A tracked file is a file whose changes Gitless will detect. Tracked files are automatically considered for commit if they are modified and appear listed under the "Tracked files with modifications" section of status. Conversely, an untracked file is a file whose changes Gitless will not detect. These are not automatically considered for commit and appear listed under the "Untracked files" section of status. Finally, an ignored file is a file that is completely ignored by Gitless and it won't even appear in the output of status.

An example output of the gl status command (foo.py and bar.py are tracked files with modifications, .gitignore is an unmodified tracked file, baz.py is an untracked file and foo.pyc is an ignored file): 

$ ls
bar.py  baz.py  foo.py  foo.pyc .gitignore
$ gl status
On branch master, repo-directory //

Tracked files with modifications:
  ➜ these will be automatically considered for commit
  ➜ use gl untrack <f> if you don't want to track changes to file f
  ➜ if file f was committed before, use gl checkout <f> to discard local changes

    foo.py
    bar.py

Untracked files:
  ➜ these won't be considered for commit)
  ➜ use gl track <f> if you want to track changes to file f

    baz.py

Now, how do files move between these three different disjoint states?

A file is ignored if it's matched by the ignore specification described in a .gitignore file. In the example above, there is a .gitignore file whose content is '*.pyc'; since foo.pyc is matched by that pattern it's therefore an ignored file.

A new file that is not matched by the ignore spec is initially an untracked file. If you want to track it you can do so with the gl track command. You can stop tracking changes to a tracked file with the gl untrack command. You can always revert a file back to some previous version with the gl checkout command. 

$ gl track baz.py
✔ File baz.py is now a tracked file
$ gl track baz.py
✘ File baz.py is already a tracked file
$ gl untrack baz.py
✔ File baz.py is now an untracked file
$ gl checkout foo.py
You have uncommitted changes in foo.py that would be
overwritten by checkout. Do you wish to continue? (y/N)
> y
✔ File foo.py checked out successfully to its state at HEAD

To save changes to files you use gl commit. By default, all tracked modified files are considered for commit, but the set of files to commit can be customized by listing the files to be committed only, or using the e/exclude and i/include flags: 

$ gl commit -m "foo and bar"
$ gl commit -m "only foo" foo.py
$ gl commit -m "only foo and baz" foo.py baz.py
$ gl commit -m "only foo" -e bar.py
$ gl commit -m "only foo and baz" -e bar.py -i baz.py
$ gl commit -m "foo, bar and baz" -i baz.py

There's also a p/partial flag that allows you to interactively select segments of files to commit.

The gl diff command can be used to see the difference between the working and committed versions of files. Like commit, the default set of files to diff is the set of all tracked modified files but it can be customized by listing files, or using the e/exclude and i/include flags.

To remove files simply do it like you would in your operating system (e.g., using Unix's rm command). Gitless will detect the change if the file was tracked, and it will appear as removed in status. Gitless currently doesn't detect renames. If you rename a file, Gitless will interpret this as a file with the old name being removed and a new one (with the new name and content) being created. If you want the renamed file to be tracked again you need to track it with gl track.

Branching

A branch is an independent line of development. You are always working on some branch. Each branch has its own history (which you can look at with the gl history command). Any changes to existing files or new files you create on a branch will not be present on the other branch when you switch branches.

To create a new branch you use the gl branch command. To switch to another branch you use the gl switch command: 

$ gl branch -c develop
✔ Created new branch develop
$ gl switch develop
✔ Switched to branch develop

To list all branches: 

$ gl branch
List of branches:
  ➜ do gl branch <b> to create branch b
  ➜ do gl branch -d <b> to delete branch b
  ➜ do gl switch <b> to switch to branch b
  ➜ * = current branch

    * master
      develop

Each branch has a head, which is the last commit done on the branch. By default, the head of a new branch is going to be equal to the head of the current branch. If you want a different commit to be the head of the new branch you can provide one with the dp/divergent-point flag.

To specify a commit you can use its id, or you can specify it via an ancestry reference with ~: HEAD~n refers to the nth commit before head.

To change the head of the current branch you use the sh/set-head flag. The sh flag is useful to, for example, amend the last commit: to do so, run gl branch -sh HEAD~1. Changing the head of the current branch won't touch your working directory, if you additionally want to reset your working directory to match the new head you use gl checkout.

Eventually branches will end up having divergent changes. There are two ways to bring changes from one branch onto the current branch: merge and fuse.

Merging branches. For merging the changes in develop onto the current branch you do gl merge develop. This creates a new merge commit that includes the changes in develop in addition to those changes in the current branch:

merge

Fusing branches. Fusing branches gives you more control than merging. When you fuse changes from some branch onto the current branch you can specify the commits to fuse and the insertion point. By default, all divergent commits are fused and the insertion point is the divergent point (the point where the source branch diverged from the current). For example, the following figure depicts a situation in which there are two branches: master (the current branch) and develop. The last commit these two branches have in common is A. This commit is the "divergent point" (because it is the point at which master and develop diverged). After doing gl fuse develop, the commits in develop are inserted in master after the divergent point:

fuse

To choose other insertion points you use the ip/insertion-point flag. You can give a commit id as input, head or dp/divergent-point:

fuse with insertion point specified

The o/only and e/exclude flags can be used to customize the set of commits to be fused:

fuse with insertion point and commit specified

During this process conflicts could occur. If so, the gl status command will change accordingly to indicate the files in conflict. Once you edit those files in conflict you mark them as resolved with gl resolve (passing the files to mark as input). Once all conflicts have been resolved you do gl commit to commit to continue with the fuse or merge.

A branch can have an "upstream branch." If a branch has an upstream associated with it, then gl fuse or gl merge can be used as shorthands for gl {fuse, merge} upstream_branch. To set an upstream branch for the current branch use gl branch -su upstream_branch.

Tagging

You use tags to signify a commit is special in some way. For example, you can use gl tag to create a tag with name "v1.0" and make it point to the commit that represents release v1.0: 

$ gl tag -c v1.0
✔ Created new tag v1.0

In this case, the tag will point to the head of the current branch, but you can tag other commits with the ci/commit flag.

To list all tags: 

$ gl tag
List of tags:
  ➜ do gl tag <t> to create tag t
  ➜ do gl tag -d <t> to delete tag t

    v1.0 ➜  tags 311bf7c Ready to release

Working with Remote Repositories

To refer to a remote repository you could always use its URL, but an easier alternative is to add the repository as a "remote" with the gl remote command: 

$ gl remote -c try-gitless https://github.com/gitless-vcs/try-gitless
✔ Remote try-gitless mapping to https://github.com/gitless-vcs/try-gitless created
successfully
  ➜ to list existing remotes do gl remote
  ➜ to remove try-gitless do gl remote -d try-gitless

Now you can use try-gitless to refer to this remote repository and use try-gitless/some-branch to refer to the branch of name some-branch that lives in try-gitless.

Downloading Changes. It is also possible to fuse or merge changes from remote branches. For example, doing gl merge try-gitless/master would merge changes in that remote branch that are not present in your local current branch. You can also use gl fuse.

Uploading Changes. To send changes upstream you use gl publish. The publish command will default to updating the upstream branch of the current branch if none is given as input.

Creating, Deleting, or Listing Remote Branches. To create, delete, or list remote branches you use the same gl branch command that you use for local branches. If you do gl branch -c try-gitless/develop this will create a branch develop that lives in the remote try-gitless. Recall that, by default, the head of this new branch will be equal to the head of the current branch, so all commits that are not present in the remote will be uploaded. To list remote branches use the r/remote flag of gl branch.

Creating, Deleting, or Listing Remote Tags. To create or delete remote tags you use the gl tag command. If you do gl tag -c try-gitless/v1.0 this will create a new tag v1.0 that lives in the remote try-gitless. You can also list remote tags with the r/remote flag of gl tag.

When you create a local repository from a remote (by passing a URL as input to the gl init command), a local branch is created for each remote branch, and each local branch is automatically configured to have as upstream its remote counterpart.

Gitless vs. Git

Saving Changes

There's no staging area in Gitless. This, coupled with a flexible commit command makes saving changes to the repository very straightforward: 

Commit all modified tracked files
$ gl commit
The default set of files to be committed are all
modified tracked files

Leave some modified tracked files (`foo`, `bar`)
out of the commit
$ gl commit -e foo bar
e/exclude excludes files from the default set
of files to be committed

Include some untracked files in the commit
$ gl commit -i foo2 bar2
i/include includes files to the default set
of files to be committed

Commit only some of the modified tracked files
$ gl commit foo3 bar3
listing files restricts the set of files to be committed
to only the specified ones

Commit only some of the modified tracked or
untracked files
$ gl commit foo3 bar3 foo4


Commit all modified tracked files
$ git commit -a
-a/--all automatically stages files that have been
modified or deleted

Leave some modified tracked files (`foo`, `bar`)
out of the commit
$ git add all files you want to commit minus foo bar
$ git commit


Include some untracked files in the commit
$ git add foo2 bar2 + other files you want to commit
$ git commit


Commit only some of the modified tracked files
$ git commit foo3 bar3



Commit only some of the modified tracked or
untracked files
$ git commit foo3 bar3 foo4
error: pathspec 'foo4' did not match any file(s)
known to git.
...hmm ok... 
$ git add foo4
$ git commit foo3 bar3 foo4

Also, you can change the classification of any file to tracked, untracked or ignored, it doesn't matter whether the file exists at head or not: 

$ gl status
...
Tracked files with modifications:
...
  foo
...

Stop tracking changes to `foo`
$ gl untrack foo
✔ File foo is now an untracked file
Now `foo` won't be automatically considered for
commit
$ gl status
...
Untracked files:
...
  foo (exists at head)
...

Start tracking changes to `foo` again
$ gl track foo
✔ File foo is now a tracked file
Now `foo` will be automatically considered for commit
$ gl status
...
Tracked files with modifications:
...
  foo
...

$ git status
...
Changes not staged for commit:
...
  modified: foo
...

Stop tracking changes to `foo`
No way to do this, if you want to prevent the
accidental commit of `foo` you can do `git add` of
all files but `foo` everytime you do a commit.
Alternatively, you can ignore the file by marking it
as assumed unchanged
$ git update-index --assume-unchanged foo
Now the file behaves as if it were ignored
$ git status
...
`foo` won't appear listed in status

Start tracking changes to `foo` again
$ git update-index --no-assume-unchanged foo
$ git status
...
Changes not staged for commit:
...
  modified: foo
...

Branching

The main thing to understand is that in Gitless a branch is a completely independent line of development. Each branch keeps its working version of files separate from each other. Whenever you switch to a different branch, the contents of your working directory are saved, and the ones corresponding to the branch you are switching to are retrieved. The classifications of files are also saved (i.e., a file can be untracked on some branch but tracked on another and Gitless will remember this): 

$ gl status
...
Tracked files with modifications:
...
  foo
...

Create new branch `develop`
$ gl branch -c develop
✔ Created new branch develop

Switch to `develop`
$ gl switch develop
✔ Switched to branch develop
$ gl status
... no changes to foo here




Switch back to `master`
$ gl switch master
✔ Switched to branch master
$ gl status
...
Tracked files with modifications:
...
  foo
...
If you want the uncommitted changes to follow you
into the new branch you can use the mo/move-over
flag to move over the changes in the current branch
to the destination branch

$ git status
...
Changes not staged for commit:
...
  modified: foo
...

Create new branch `develop`
$ git branch develop


Switch to `develop`
$ git checkout develop
$ git status
...
Changes not staged for commit:
...
  modified: foo
...

Switch back to `master`
$ git checkout master
...
Changes not staged for commit:
...
  modified: foo
...

This means that in Gitless you don't have to worry about uncommitted changes conflicting with the changes in the destination branch: 

Say we have uncommitted changes to `foo` that
conflict with the state of `foo` in branch `develop`

Switch to `develop`
$ gl switch develop
✔ Switched to branch develop


Say we have uncommitted changes to `foo` that
conflict with the state of `foo` in branch `develop`

Switch to `develop`
$ git checkout develop
error: Your local changes to the following files
would be overwritten by checkout:
     foo
Please, commit your changes or stash them before
you can switch branches.
Aborting
$ git stash
Saved working directory and index state WIP on
master: fbe3b8c ...
HEAD is now at fbe3b8c ...
$ git checkout develop
Switched to branch 'develop'

And if you are in the middle of a fuse/merge and you want to put aside the conflict resolution for later, you can. The conflict will be there when you switch back: 

$ gl fuse develop
...
✘  There are conflicts you need to resolve
$ gl status
On branch master, repo-directory //

You are in the middle of a fuse; all
conflicts must be resolved before
committing
...
Tracked files with modifications:
...
  foo (with conflicts)
...









Switch to `bugfix`
$ gl switch bugfix
✔ Switched to branch bugfix
No conflicts here















Switch back to `develop`
$ gl switch develop
✔ Switched to branch develop
$ gl status
On branch master, repo-directory //

You are in the middle of a fuse; all
conflicts must be resolved before
committing
...
Tracked files with modifications:
...
  foo (with conflicts)
...

$ git rebase develop
First, rewinding head to replay your work on top of
it...
Applying: this commit should trigger a conflict
Using index info to reconstruct a base tree...
M foo
Falling back to patching base and 3-way merge...
Auto-merging foo
CONFLICT (content): Merge conflict in foo
Failed to merge in the changes.
Patch failed at 0001 foo conflict
The copy of the patch that failed is found in:
   ...
$ git status
rebase in progress; onto 989269e
You are currently rebasing branch 'master' on
'989269e'.
  ...
Unmerged paths:
  ...
  both modified:   foo
...

Switch to `bugfix`
$ git checkout bugfix
foo: needs merge
error: you need to resolve your current index first
Maybe stash works?
$ git stash
foo: needs merge
foo: needs merge
foo: unmerged (0b3c542edb2e9e8ff801c669d7a5f2d78...)
foo: unmerged (94421333de34e32405f632d0f7b63b39c...)
foo: unmerged (eb97dba229aab53fe5f231e60491dd2a7...)
fatal: git-write-tree: error building trees
Cannot save the current index state
 ...hmm..ok...
$ save all the changes to files somewhere else
$ git rebase --abort
$ git checkout bugfix
Switched to branch 'bugfix'

Switch back to `develop`
$ git checkout develop
$ git status
...
We aborted the rebase to be able to switch branches,
so there's nothing here now
$ git rebase develop
... same conflict as before
$ Copy back the changes we saved

Working with Remote Repositories

Syncing with other repositories in Gitless works quite similar to Git: 

Configure a new remote `try-gitless`
$ gl remote -c try-gitless
https://github.com/gitless-vcs/try-gitless
✔ Remote try-gitless mapping to
https://github.com/gitless-vcs/try-gitless
created successfully
  ➜ to list existing remotes do gl remote
  ➜ to remove try-gitless do gl remote -d try-gitless

Download and apply changes from a branch in
`try-gitless`
$ gl fuse try-gitless/master
...
✔ Fuse succeeded
If you instead want to merge the changes, you
can do `gl merge try-gitless/master`

You can also set an upstream for the current branch
$ gl branch -su try-gitless/master
✔ Current branch master set to track
try-gitless/master
$ gl fuse
! No src branch specified, getting changes from
upstream branch try-gitless/master
...
✔ Fuse succeeded

Send changes to the remote
$ gl publish
! No src branch specified, sending changes to
upstream branch try-gitless/master
✔ Publish succeeded
Only the changes in the current branch are uploaded
Configure a new remote `try-gitless`
$ git remote add try-gitless
https://github.com/gitless-vcs/try-gitless






Download and apply changes from a branch in
`try-gitless`
$ git pull try-gitless/master
...
If you instead want to rebase the changes, you can
do `git pull --rebase try-gitless/master`

You can also set an upstream for the current branch
$ git branch --set-upstream master try-gitless/master
$ git pull
...







Send changes to the remote
$ git push
What happens when you do a push depends on the value
of the `push.default` config variable

Research

If you are interested in software design and want to learn more about the research behind Gitless, take a look at the following papers:

If you want a thirty-minutes summary presentation, watch "What’s Wrong With Git?" from Git Merge 2017.